#include "web.h"


void web_setup ()
{
   
    //Creation des différents styles

    //Les verts pour la mise en mrche de la seringue
    sprintf(couleur1, "background-color: #%06X;", (unsigned int) 0xb2dbbf);
    sprintf(couleur2, "background-color: #%06X;", (unsigned int) 0x5a8668);

    //Le rouge pour la seringue a l'arrêt
    sprintf(couleur3, "background-color: #%06X;", (unsigned int) 0xc97064);
    sprintf(couleur4, "background-color: #%06X;", (unsigned int) 0x762419);

    //Les marrons pour la config des seringues
    sprintf(couleur5, "background-color: #%06X;", (unsigned int) 0xce9f6f);
    sprintf(couleur6, "background-color: #%06X;", (unsigned int) 0x926448);


    sprintf(couleur7, "background-color: #%06X;", (unsigned int) 0x0a7477);
    sprintf(couleur8, "background-color: #%06X;", (unsigned int) 0x052a38);
    sprintf(couleur9, "background-color: #%06X;", (unsigned int) 0x044365);
    sprintf(couleur10, "background-color: #%06X;", (unsigned int) 0x58b8c3);





    //Création des différents onglets
    uint16_t tab1 = ESPUI.addControl(ControlType::Tab, "Configurations", "Configurations");
    uint16_t tab2 = ESPUI.addControl(ControlType::Tab, "Mise en marche", "Mise en marche");
    uint16_t tab3 = ESPUI.addControl(ControlType::Tab, "Nouvelle Seringue", "Nouvelle seringue");
    uint16_t tab4 = ESPUI.addControl(ControlType::Tab, "Paramètres avancés", "Paramètres avancés");
    uint16_t tab5 = ESPUI.addControl(Tab, "", "Styled controls");

    //Au dessus des tables
    
    status_label_id1 = ESPUI.label("Etat du pousse-seringue 1 :", ControlColor::None, "A l'arrêt");


    //Mettre en route le pousse-seringue
    activation = ESPUI.addControl(ControlType::Switcher, "Mise en marche", "Arrêt", ControlColor::None, status_label_id1, switch_status_callback1, (void*)19);


    //Style
    ESPUI.setPanelStyle(status_label_id1, couleurs[2]);
    ESPUI.setElementStyle(status_label_id1, couleurs[3]);


    //Deplacement demandé du pousse-seringue
    uint16_t main_number = ESPUI.number("Positions finale et possitionnement du pousse-seringue", position_choice, ControlColor::None, 0, 0, 50);
    ESPUI.addControl(Min, "", "0", None, main_number);
    ESPUI.addControl(Max, "", "50", None, main_number);
    //Visualisation de l'avancement
    slider = ESPUI.addControl(ControlType::Slider, "Distance", "0", ControlColor::None, main_number, slider_callback);


    //Style
    ESPUI.setPanelStyle(main_number, couleurs[4]);
    ESPUI.setElementStyle(main_number, couleurs[5]);


    zero = ESPUI.button("Initialisation", go_to_zero , ControlColor::None, "Allez en butée");
    ESPUI.setPanelStyle(zero, couleurs[4]);
    ESPUI.setElementStyle(zero, couleurs[5]);



    //TAB1  = Configurations

    //Choix de la seringue 1
    ESPUI.addControl(ControlType::Separator, "Seringue 1", "", ControlColor::None, tab1);
    uint16_t select1
        = ESPUI.addControl(ControlType::Select, "Choix de la seringue :", "", ControlColor::None, tab1, select_callback);
    ESPUI.addControl(ControlType::Option, "Seringue A", "Opt1", ControlColor::None, select1);
    ESPUI.addControl(ControlType::Option, "Seringue B", "Opt2", ControlColor::None, select1);
    ESPUI.addControl(ControlType::Option, "Seringue C", "Opt3", ControlColor::None, select1);
    ESPUI.setPanelStyle(select1, couleurs[4]);
    ESPUI.setElementStyle(select1, couleurs[5]);


    uint16_t carac1 = ESPUI.addControl( ControlType::Label, "Caractéristiques de la seringue 1 : ",  "D = 4mm, V = 10µL", ControlColor::None, tab1);
    ESPUI.setPanelStyle(carac1, couleurs[4]);
    ESPUI.setElementStyle(carac1, couleurs[5]);

    //TAB2 : Mise en marche



    //TAB3 : Nouvelle seringue
    ESPUI.addControl(ControlType::Text, "Nom de la seringue :", "", ControlColor::Alizarin, tab3, text_callback);
    ESPUI.addControl(ControlType::Number, "Diamètre interne de la seringue en mm", "5", ControlColor::Alizarin, tab3, number_callback);
    ESPUI.addControl(ControlType::Number, "Volume total de la seringue en µL", "5", ControlColor::Alizarin, tab3, number_callback);

    etat_button_seringue = ESPUI.addControl(
    ControlType::Button, "Ajouter la seringue", "Valider", ControlColor::Peterriver, tab3, button_seringue);
  

    //TAB4 : Configurations avancées
    //Diamètre de la vis
    ESPUI.addControl(ControlType::Number, "Diamètre de la vis sans fin", "5", ControlColor::None, tab4, number_callback);
    //Sens de rotation du moteur
    ESPUI.addControl(ControlType::Switcher, "Sens de rotation du moteur", "Horaire", ControlColor::None, tab4, other_switch_callback);
    

    //TAB5 : Test de style



    nv_bouton_ctrl = ESPUI.addControl(ControlType::Button, "Nouveau Bouton", "Let magic happen", ControlColor::None, tab5, nv_bouton_ctrl_callback);
    ESPUI.setPanelStyle(nv_bouton_ctrl, couleurs[0]);
    ESPUI.setElementStyle(nv_bouton_ctrl, couleurs[1]);

    nv_bouton = ESPUI.addControl(ControlType::Button, "Abra", "Cadabra", ControlColor::None, tab5, nv_bouton_callback);
    


    //Lancement
    ESPUI.begin("ESPUI Control");
}


/************ Les fonctions callbacks ****************/

void number_callback(Control* sender, int type)
{
    Serial.println(sender->value);
}


void text_callback(Control* sender, int type)
{
    Serial.print("Text: ID: ");
    Serial.print(sender->id);
    Serial.print(", Value: ");
    Serial.println(sender->value);
}

void slider_callback(Control* sender, int type)
{
    Serial.print("Slider: ID: ");
    Serial.print(sender->id);
    Serial.print(", Value: ");
    Serial.println(sender->value);
    // Like all Control Values in ESPUI slider values are Strings. To use them as int simply do this:
    int sliderValueWithOffset = sender->value.toInt() + 100;
    Serial.print("SliderValue with offset");
    Serial.println(sliderValueWithOffset);
}

void button_status_callback1(Control* sender, int type, void* param)
{
    Serial.println(String("param: ") + String(long(param)));
    switch (type)
    {
    case B_DOWN:
        Serial.println("Status: Start");
        ESPUI.print(status_label_id1, "En marche");
        break;

    case B_UP:
        Serial.println("Status: Stop");
        ESPUI.print(status_label_id1, "A l'arrêt");
        break;
    }
}

void button_status_callback2(Control* sender, int type, void* param)
{
    Serial.println(String("param: ") + String(long(param)));
    switch (type)
    {
    case B_DOWN:
        Serial.println("Status: Start");
        ESPUI.print(status_label_id2, "En marche");
        break;

    case B_UP:
        Serial.println("Status: Stop");
        ESPUI.print(status_label_id2, "A l'arrêt");
        break;
    }
}

void button_callback(Control* sender, int type)
{
    switch (type)
    {
    case B_DOWN:
        Serial.println("Button DOWN");
        break;

    case B_UP:
        Serial.println("Button UP");
        break;
    }
}

void pad_callback(Control* sender, int value)
{
    switch (value)
    {
    case P_LEFT_DOWN:
        Serial.print("left down");
        break;

    case P_LEFT_UP:
        Serial.print("left up");
        break;

    case P_RIGHT_DOWN:
        Serial.print("right down");
        break;

    case P_RIGHT_UP:
        Serial.print("right up");
        break;

    case P_FOR_DOWN:
        Serial.print("for down");
        break;

    case P_FOR_UP:
        Serial.print("for up");
        break;

    case P_BACK_DOWN:
        Serial.print("back down");
        break;

    case P_BACK_UP:
        Serial.print("back up");
        break;

    case P_CENTER_DOWN:
        Serial.print("center down");
        break;

    case P_CENTER_UP:
        Serial.print("center up");
        break;
    }

    Serial.print(" ");
    Serial.println(sender->id);
}


void switch_status_callback2(Control* sender, int value, void* param)
{

    Serial.println(String("param: ") + String(long(param)));
    switch (value)
    {
    case S_ACTIVE:
        Serial.print("Active:");
        ESPUI.print(status_label_id2, "En marche");
        break;

    case S_INACTIVE:
        Serial.print("Inactive");
        ESPUI.print(status_label_id2, "A l'arrêt");
        break;
    }

    Serial.print(" ");
    Serial.println(sender->id);
}


void select_callback(Control* sender, int value)
{
    Serial.print("Select: ID: ");
    Serial.print(sender->id);
    Serial.print(", Value: ");
    Serial.println(sender->value);
}

void other_switch_callback(Control* sender, int value)
{
    switch (value)
    {
    case S_ACTIVE:
        Serial.print("Active:");
        break;

    case S_INACTIVE:
        Serial.print("Inactive");
        break;
    }

    Serial.print(" ");
    Serial.println(sender->id);
}


void button_seringue(Control* sender, int type)
{
    switch (type)
    {
    case B_DOWN:
        Serial.println("Button DOWN");
        break;

    case B_UP:
        Serial.println("Button UP");
        break;
    }
}

//Most elements in this test UI are assigned this generic callback which prints some
//basic information. Event types are defined in ESPUI.h
void general_callback(Control *sender, int type) {
	Serial.print("CB: id(");
	Serial.print(sender->id);
	Serial.print(") Type(");
	Serial.print(type);
	Serial.print(") '");
	Serial.print(sender->label);
	Serial.print("' = ");
	Serial.println(sender->value);
}

void nv_bouton_ctrl_callback(Control *sender, int type) {
    

    if(type == B_UP) {
        
        test = !test;
        ESPUI.updateVisibility(nv_bouton, test);
        
	}
}

void nv_bouton_callback(Control *sender, int type) {
	if(type == B_DOWN) {
        ESPUI.setPanelStyle(nv_bouton, couleurs[2]);
        ESPUI.setElementStyle(nv_bouton, couleurs[3]);
	}
}

void position_choice (Control *sender, int type) {

    Serial.printf("val=%s\n", sender->value.c_str()); 
    syringe_filled.set_exchange_volume_mL(atof(sender->value.c_str()));

}

void go_to_zero (Control *sender, int type) {

    if(type == B_UP) {
        syringe_filled.show_configuration();
        Serial.printf("Go to zero"); 
        syringe_filled.go_to_zero();
        ESPUI.print(status_label_id1, "En marche");
        ESPUI.setPanelStyle(status_label_id1, couleurs[0]);
        ESPUI.setElementStyle(status_label_id1, couleurs[1]);


    }

}

void switch_status_callback1(Control* sender, int value, void* param)
{

    Serial.println(String("param: ") + String(long(param)));
    switch (value)
    {
    case S_ACTIVE:
        Serial.print("Active:");
        ESPUI.print(status_label_id1, "En marche");
        ESPUI.setPanelStyle(status_label_id1, couleurs[0]);
        ESPUI.setElementStyle(status_label_id1, couleurs[1]);
        syringe_filled.exchange();
        break;

    case S_INACTIVE:
        Serial.print("Inactive");
        ESPUI.print(status_label_id1, "A l'arrêt");
        ESPUI.setPanelStyle(status_label_id1, couleurs[2]);
        ESPUI.setElementStyle(status_label_id1, couleurs[3]);
        syringe_filled.stop();
        break;
    }

    Serial.print(" ");
    Serial.println(sender->id);
}


void web_loop ()
{
  //bool switchi = syringe.isRunning();
  //bool a = syringe.isRunning();
	//if(millis() > last_time + 500) {
    //ESPUI.updateSlider(slider, syringe.currentPosition()*100/lengthSyringePump);
		//lastTime = millis();
    //if (syringe.isRunning())
      //ESPUI.updateControlValue(activation, "1");
    //else
      //ESPUI.updateControlValue(activation, "0");

	//}

}